Select your individual print template

The Eurohole is a slit-shaped cutout at the top of packaging. A great choice if you want to present your products hanging at the point of sale.

Eurohole

By booking our professional design check, you entrust our experienced design team with a thorough review of your project: you receive feedback, for example, on whether the bila-white layer matches the artwork layer and whether the special effect you want is achieved. We also make sure that no important information is located near the sealing zones.

Expert check

Showing off the certified and renowned &quot;Made for Recycling&quot; seal of recycling service provider Interzero will verify the outstanding recyclability of the packaging to your customers.

"Made for Recycling"-certification

Biobased plastics are based on renewable raw materials and, as an alternative to fossil resources, help drive sustainable development. Such plastics are tested and certified by the renowned TÜV Austria with the &quot;OK biobased&quot; seal.

"Ok-biobased"-certification

Our paper comes exclusively from FSC®-certified forest regions. With the seal of the Forest Stewardship Council® organisation, the sustainability of your packaging is directly visible to your customers! You can print the seal on your pouches in portrait or landscape format.

FSC®-certification

To simplify the process of filling your product into the pouch, we also offer the &quot;open Zipper&quot; option. In this case, you&#039;ll receive your pouches with opened Zippers, allowing you to start filling your product right away!

Standard Zipper open

This add-on is commonly used in the pouching industry. The Standard Zipper is located at the top of your package. It can be easily opened and closed. Also, thanks to the wide opening, the Standard Zipper enables easy access to the product for your customers.

Standard Zipper

Our standard production and delivery time is 3-4 weeks* (stand-up pouches and flat pouches) or 4-7 weeks (flat bottom pouches) after design approval.*Shipping costs are calculated based on the quantity of packaging ordered. Delivery times vary depending on the country of delivery. You can find more information <a target="_blank" href="/redirect/f0c81ccf-2580-4b11-b331-5350098e4495">here</a>.

Standard

Our automatic design check shows you directly after uploading your design whether it is printable or whether you should still make adjustments. You receive detailed feedback on everything from colour space to image sizes.

Basic check

An aroma valve allows CO2 to escape while preventing air from entering. Your contents remain protected without the packaging inflating or bursting. An absolute must for <a target="_blank" href="/redirect/be760f2d-6c4f-435b-8087-5f8d0aee62dd">coffee packaging</a>!

Aroma valve

The &quot;Zipper&quot; is a feature located at the top of your packaging and can be easily opened and sealed airtight - ensuring your contents stay fresh and always in place! Due to reasons of technical feasibility in the production process, a Zipper is closed when being attached to your packaging. If you prefer to save time and costs when filling your product, opt for the &quot;Standard Zipper open&quot; option instead.

Standard Zipper closed

The Pocket Zipper is located only in the front of the packaging. Your customers can easily open it by pulling the pull tab, pour the content in portions and close it airtight after usage. This add-on allows you to open the pouch particularly wide during the filling process - which is most useful for coffee filling. Due to production processes, packaging is supplied with the Pocket zipper closed by default.

Pocket Zipper

FSC®-certified paper (FSC®-C170984), with plastic film made from renewable raw materials (PLA): Ideal for products that do not clump (e.g. dry products such as sugar substitutes, nuts and all forms of muesli).

Biobased Ben

Metallised mono-plastic (polypropylene): Excellent for products that need particularly high UV protection (e.g. coffee, tea, CBD and tobacco).

Metallised Martha

Innovative paper structure made from FSC®-certified paper (FSC®-C170984): Ideal for products that are not sensitive to oxygen

Natural Nils

FSC®-certified paper (FSC®-C170984), with strong inner protective layer (PET): Optimally suited for a variety of products (e.g. coffee, snacks, CBD, supplements and tea).

Robust Robin

Plastic mono-material (polypropylene) with ALox-based inner layer: Excellent for products that need particularly high oxygen protection (e.g. granola, pet food and snacks).

Transparent Toni

Flat pouch

Our flat pouches equipped with a Euro hole are the ideal packaging solution for you if you wish to showcase your product in a hanging display at the point of sale.

Stand-up pouch | Doypack

The Packiro stand-up pouches are handy, functional and don&#039;t take up too much volume. In short: opt for our stand-up pouches if you are looking for an all-rounder and eye-catcher to showcase on the sales shelf.

Stand-up pouch

Flat bottom pouch

Our flat bottom pouches are particularly durable and resistant. Because of the integrated aroma valve, these pouches are the best fit for coffee products.

Printed Rollstock

Are you looking for flowpacks, stick packs or sachets to package products such as bars und crisps or even cosmetic wipes with your individual design? Then our flowpacks (supplied as a roll) are just the thing for you!

Printed Roll

Quad seal pouch

Our gusseted bags are extremely dimensionally stable and suitable for large quantities of your product. When used with the integrated aroma valve, they provide the perfect environment for your coffee.

Packaging dimensions: Width: 85 mm Height: 150 mm

Packaging dimensions: Width: 120 mm Height: 190 mm

Packaging dimensions: Width: 300 mm Height: 350 mm

Packaging dimensions: Width: 200 mm Height: 235 mm Depth: 87 mm

Extra wide opening. Perfect for supplements such as powder.

Pouch dimensions Width: 215 mm Height: 135 mm Depth: 80 mm

Packaging dimensions: Width: 210 mm Height: 320 mm Depth: 110 mm

Packaging dimensions: Width: 155 mm Height: 340 mm Depth: 95 mm

Packaging dimensions: Width: 85 mm Height: 100 mm Depth: 60 mm

Packaging dimensions: Width: 90 mm Höhe: 160 mm Depth: 60 mm

Pouch dimension: Width: 182 mm Height: 105 mm Depth: 65 mm

Packaging dimensions: Width: 145 mm Height: 260 mm Depth: 87 mm

Packaging dimensions: Width: 85 mm Height: 100 mm

Packaging dimensions: Width: 100 mm Height: 160 mm

Packaging dimensions: Width: 160 mm Height: 230 mm

Packaging dimensions: Width: 180 mm Height: 250 mm Depth: 90 mm

Packaging dimensions: Width: 190 mm Height: 270 mm

Packaging dimensions: Width: 130 mm Height: 200 mm Depth: 70 mm

Pouch dimension Width: 282 mm Height: 155 mm Depth: 85 mm

Produktmaße Width: 260 mm Height: 300 mm Depth: 110 mm

Produktmaße Width: 115 mm Höhe: 235 mm Depth: 69 mm

Packaging dimensions: Width: 160 mm Height: 225 mm Depth: 80 mm

Packaging dimensions: Width: 85 mm Height: 145 mm Depth: 60 mm

Packaging dimensions: Width: 180 mm Height: 290 mm Depth: 90 mm

1. Scope1.1 Unless otherwise agreed in writing, the following General Terms and Conditions of Sale shall apply to deliveries and services (“Conditions of Sale”) by Packiro GmbH (“Packiro”). All of our deliveries and services are only offered and rendered to entrepreneurs, i.e. natural or legal persons or an entity subject to public law entering into legal transactions that fall within the scope of their commercial or independent business activities.
1.2 Any other agreement differing from these Conditions of Sale on the part of the beneficiary (“Buyer”) shall be non-binding for Packiro, even if Packiro has not expressly objected to the same or the Buyer will only commit to their own conditions. The unconditional delivery of goods, provision of services or acceptance of payments does not constitute recognition of terms that vary from the Conditions of Sale. Any conflicting conditions shall be revoked as a precautionary measure.
1.3 The Conditions of Sale shall supplement any other agreements made between the parties. In the event that individual agreements deviating from these terms are made, these T&amp;Cs shall be deemed subordinate and supplementary.2. Conclusion of contract and duty to cooperate2.1 All Packiro offers are subject to change. A contract shall only be concluded upon written confirmation or execution of the order by Packiro.
2.2 Artwork shall be finalised upon conclusion of the contract and requires the customer&#039;s consent. The artwork shall form the basis of the goods as agreed between Packiro and the customer; any subsequent claim concerning the finished goods will be rejected.3. PricesThe prices stated by Packiro shall be quoted ex works (EXW). Value added tax shall be payable additionally at the statutory rate in effect on the invoice date.4. Deliveries, delivery deadlines, delays4.1 Partial deliveries and services are permitted provided that they are feasible for the Buyer.4.2 In the event that Packiro exceeds an agreed delivery or service deadline or does not fulfil any other contractual agreement in time, the Buyer is entitled to set an appropriate grace period.4.3 If the delivery or service is not provided upon expiration of the grace period and the customer wishes to withdraw from the agreement or demand compensation in place of delivery, the customer is obliged to notify Packiro of this by setting a further appropriate grace period or establishing a further reasonable period for delivery or provision of service.4.4 If the delivery date is delayed by up to two (2) working days due to export controls, this shall not constitute grounds for a delay.5. Place of performance and delivery, transfer of riskThe goods are delivered according to the Incoterm DAP (Delivery At Place). Packiro is responsible for delivering the goods to the buyer&#039;s named place of destination. However, the transport costs are shown separately and need to be paid by the buyer. The costs for carrying out all necessary import formalities are expressly excluded. These costs are also paid by the buyer. Therefore, all duties related to imports into the country of destination are to be paid by the buyer or to be paid to the recipient. The shipment is therefore declared in the country of destination to the recipient. If the import is also subject to VAT due to the total value of the goods in the destination country, the VAT is also paid by the buyer.6. Retention of title6.1 The delivered goods shall remain the property of Packiro until payment has been made in full based on the agreement concluded. (Retention of goods)6.2 With the processing, combination and blending of the goods, Packiro shall be entitled to co-ownership of the new goods equal to the value of the products by Packiro in proportion to the value of the processed or blended goods. (Processed goods)6.3 The Buyer shall only be entitled to resell goods subject to our reservation of title and only in the course of normal business. The Buyer shall now absolve Packiro from any responsibility for third-party claims in the amount of the original invoiced price of the product (including VAT). The Buyer is authorised to collect any debts arising from the resale. The Buyer is only entitled to make pledges or transfers of ownership with the prior consent of Packiro.6.4 If the value of our securities exceeds the total claim against the Buyer by more than 20%, then, at the request of the Buyer, Packiro is obliged to release excess securities of our choice. This shall be based on the net invoice value charged by Packiro to the Buyer.6.5 In the event of a delay in payment, impending suspension of payment, unsatisfactory information as to the customer&#039;s solvency or financial position, if judicial executions or protests with respect to the Buyer occur or if an application to initiate insolvency proceedings against the Buyer has been filed, Packiro is entitled to take back the goods delivered.6.6 Enforcement of the retention-of-title provisions and seizure of the item of sale by Packiro shall not be deemed withdrawal from the contract in so far as the latter has not been expressly declared by Packiro in writing. Packiro is only entitled to further processing and other use of the goods subject to retention upon withdrawal from the contract.6.7 The Buyer is obliged to carefully store and upkeep the retained goods for Packiro free of charge and safeguard them against loss, damage or deterioration with the conscientiousness and care of a prudent businessman. The Buyer assigns any insurance or compensation claims due to the loss, damage or deterioration of the reserved goods to Packiro.7. Force majeure In the event of force majeure or any other unforeseen events that may affect the ability of Packiro to deliver or provide a service, or render it impossible, the contractual obligations of both parties shall be suspended. In these cases, the dates for deliveries and/or services shall be extended until the disruption is over. Force majeure events include: energy or raw material shortages, industrial disputes in own and third-party companies, lock-outs, official injunctions, absence of third-party supplies, pandemics/epidemics, stoppages and other circumstances that cannot be foreseen by either party. The contracting party that wishes to invoke force majeure and its predicted duration shall notify the other contracting party without delay.8. Invoicing and payment8.1 The Buyer pays the purchase price upon completion of the order via prepayment or on account. For first-time orders, the payment method of advance payment always applies and payment must be made within 7 days. In the case of purchase on account, payment is due within 14 days of receiving the goods. For orders of €5,000 or more, a deposit of 50 % of the purchase price is always due, which must be paid within 7 days. Upon receiving the goods, the remaining 50 % is to be paid within 14 days.8.2 Should the Buyer default on a payment, the Buyer is obliged to pay statutory default interest at a rate of 9 percentage points above the base interest rate. In addition, Packiro shall be entitled to payment of a lump sum of €40; Packiro further reserves the right to claim further damages.8.3 The Buyer may counter demands only in the case of indisputable or legally determined demands, unless such claims originate from the same mutual contractual relationship as the purchase price.8.4 If the Buyer falls behind with a payment, all outstanding payments owed to Packiro shall be immediately due. 8.5 Packiro is entitled to send invoices to the Buyer using electronic means only.9. Warranty for defects, damage compensation9.1 The Buyer is obliged to inspect the goods upon receipt. Obvious defects must be reported immediately following delivery, while hidden defects must be reported immediately following their discovery. Packiro must be notified in writing of any defects. If the Buyer does not notify of defects in good time or in writing, the delivery and performance of Packiro is considered to be free of faults. If the Buyer accepts our delivery or performance in full knowledge of a fault, the Buyer is only entitled to any rights derived if these rights have expressly been reserved in writing.9.2 If the delivery or service is faulty, Packiro can choose to provide a replacement or improvement (subsequent fulfilment). Packiro will have the opportunity to fulfil this service, typically no less than three weeks. In the event that subsequent fulfilment fails, the Buyer may withdraw from the contract or reduce the remuneration. Purchaser shall only have the right to reduce the purchase price if only negligible impairment of the value or the usage of our goods and services exists.9.3 Furthermore, the Buyer may claim damages pursuant to statutory requirements and refund of its actual out-of-pocket expenses necessary for the purpose of repair or replacement. Sections 9.6 and 9.7 shall apply to claims for damages and refund.9.4 Legal claims for recourse on the part of Buyer against Packiro shall only exist within the framework of the statutory provisions. The agreements between the Buyer and its customers that exceed the legal scope shall not extend to Packiro. The above provision shall apply accordingly to the reimbursement of expenses.9.5 Liability for a specified purpose of use or any specified suitability shall only be assumed by Packiro to the extent that the latter is agreed as such expressly between the parties. This excludes any liability for the products sold inside the item, in particular baby food, chemical detergents, drugs, medicinal products, meat and cosmetics. The Buyer shall have the exclusive risk of suitability and use.9.6 The Buyer&#039;s claims for damages and reimbursement of expenses, irrespective of their legal basis, against Packiro, its legal representatives, employees and vicarious agents (collectively &quot;Representatives&quot;) shall only exist if Packiro or its Representatives have acted intentionally or with gross negligence or if the breached obligation is essential for achieving the purpose of the contract. In the event of a simple negligent breach of essential obligations of the contractual relationship, Packiro&#039;s liability is limited to the foreseeable damage typical for the contract and amounts to a maximum of the purchase value of the goods.9.7 The aforementioned exclusion or limitation of liability shall not apply in cases of damage to life, body or health or damage to private property by Packiro under the Product Liability Act or in other cases of mandatory liability.9.8 All warranty claims, compensation for damages claims, and/or claims for the reimbursement of expenditure by the Buyer shall become statute-barred one year after the start of the statutory period of limitation, or in the event of gross or deliberate misconduct and in the event of fraudulent concealment in accordance with statutory regulations.10. Termination10.1 Packiro is - notwithstanding any other statutory or contractual provisions - entitled to terminate the contract with the Buyer without notice if the Buyer refuses the fulfilment of the contract by Packiro without justifying reason, in the event of significant deterioration in the asset situation of the customer, if an export ban enters into force against the Buyer or its country, or if other unforeseen events occur which affect the ability of Packiro to fulfil the contract.10.2 If the customer terminates the contract before production of the goods has taken place, Packiro is entitled to demand that the customer pay an administration fee of 5% of the order value. If the customer terminates the contract after production of the goods has taken place, the customer must pay the entire order value less any expenses not incurred (e.g. handling costs).11. Confidentiality, intellectual property rights, advertising 11.1 The Buyer is obliged to treat any unpublished information, knowledge and documents (“information”) provided by Packiro as confidential and not make it accessible to third parties, and only use it for the purpose of fulfilling the respective order.11.2 Packiro retains title and full ownership rights to all such intellectual property of packaging designs created by Packiro or any artwork provided electronically. Excluded therefrom are the customer&#039;s own legally valid brand and design rights, which shall remain unaffected even though Packiro is granted appropriate rights of use for the purpose of order fulfilment.11.3 Packiro is entitled to use pictures or moving images of the customer’s finished goods for its own advertising purposes for an unlimited duration.12. Other provisions12.1 The Buyer may only transfer the rights and obligations in accordance with this contractual relationship to third parties with Packiro&#039;s prior written consent.12.2 The Buyer shall be responsible for compliance with statutory and regulatory requirements for the import, transport, storage, and use of the goods.12.3 Should a stipulation in these business terms become invalid, this does not change the validity of the other terms.12.4 Amendments, additions and/or termination of a contract or these Conditions of Sale must be made in writing.13. Place of jurisdiction and governing law13.1 All legal relations between the parties shall be governed exclusively by the law of the Federal Republic of Germany with the exclusion of the United Nations Convention on Contracts for the International Sale of Goods (CISG).13.2 The exclusive place of jurisdiction is the headquarters of Packiro. Packiro is also entitled to bring an action against the Buyer at its place of general jurisdiction.Version dated October 2023

Terms

Made for Recycling Certification


The user fee that allows you to print the "Made for Recycling" logo on your packaging.



Designs

Standard Delivery Time

Standard design check

Expert design check

Size

Material

Transparent Toni (Recyclable Plastic)


Ensures freshness after opening thanks to a resealability.



Euro hole


Offers the possibility to hang your packaging for product presentation.



Valve


Allows gases to escape in the event of overpressure without air being able to enter from the outside.



Closed

Open

Metallised Martha (Recyclable Plastic)

XXL2 - 3000ml

XXL - 1500ml (old)

FSC® Certification


The user fee that allows you to print the "FSC" logo on your packaging.



Robust Robin (FSC Mix Credit)

Natural Nils (FSC Mix Credit)

OK biobased


The user fee that allows you to print the "OK biobased" logo on your packaging.



Biobased Ben (FSC Mix Credit)


Enables easy filling due to a large opening despite zipper.



Sides Black (CMYK 0/0/0/100)

Sides White (CMYK 0/0/0/0)

Your own design on the sides

From a total quantity of 2.500, sides and bottom can also be printed individually. All bags receive the same design for sides and bottom regardless of the number of designs.

Express Plus Delivery Time

Tips & instructions

General information

Knowledge

You entered

We were unable to verify your address. Please check our suggestion.

We were unable to verify your address. Please check our suggestion to ensure quick delivery.

Suggested address

Confirm your address

You need larger quantities? Here <link>Request a non-binding offer</link> or simply call: <phoneicon> </phoneicon> +49 221 82827200 / +44 20 4587 8366

You need larger quantities? Here <link>Request a non-binding offer</link> or simply call: <phoneicon> </phoneicon> +49 221 82827200 / +44 20 4587 8366

Name (optional)

Feedback

Packiro Chatbot

The responses originate from an AI beta version and may be inaccurate or misleading. Please verify all information carefully. No personal data—such as your name or e-mail address—may be entered into the chatbot. For more information, see our <link>Terms of Use</link>

Recyclable paper

Protective properties

By loading the video, you accept YouTube's privacy policy.

It was a pleasure to meet you in person! We'll get back to you as soon as possible to help you find the perfect new packaging for your business! We usually get back to you within only 24 hours. 

Well done! Thank you for your reaching out to Packiro!

Send us a message:

You can reach us from Mon. to Fri. between 9-12am and 2-5pm (UTC+02:00 Berlin).

Call us!

Our help area answers the most frequently asked questions of our customers

Our help area

We're sorry! Please try again later. Go back to the last page you visited or go back to our homepage.

Sorry, an error has occurred.

Glossary

Was this post helpful?

Enlarged view

3D preview {title}

For us to consult you in the best possible way, we would like to learn more about your business.

Do you operate a business?

What products do you need packaging for?

How many packaging units will you need per year?

Estimated amount of packaging needed

What are you looking for exactly?

Please specify your ongoing project

Do you need packaging for an ongoing project?

What is your current situation?

Packaging consultation

What would you like to know more about?

Your location and language are set for you as follows:

Select your preferred language:

This page has probably already been recycled by us. So you should find the content in a repackaged form on our site!

Go back to the previous page or have a look at our homepage.

Unfortunately, this page does not exist.

During the production of the paper-based packaging, light discolouration can occur on welded areas, as the pigments of digital printing inks are very susceptible to heat.

Choose a payment method

You pay 50% before delivery and the rest after your order was delivered.

After we've confirmed your order, you will be redirected to a secure payment page. There, you can conveniently pay with Bancontact.

After we've confirmed your order, you will be redirected to a secure payment page. Enter your credit card information here. We accept VISA, Mastercard and American Express payments.

After we've confirmed your order, you will be redirected to a secure payment page. There, you can conveniently pay with EPS.

After we've confirmed your order, you will be redirected to a secure payment page. With iDEAL, you can conveniently pay via bank transfer (only available in Netherlands)

After order confirmation, you will be redirected to a secure payment page. There, you can conveniently pay with PayPal.

Pay for your order after you have received your goods. You will receive the invoice as soon as your packaging is shipped.

Payment is due upon completion of your order. You will receive the invoice as soon as you have placed your order.

It's your first order?

You have not selected any Add-ons yet. <bold>Do you still want to continue?</bold>

Select Add-ons for your packaging!

Add-ons

Your packaging has been edited.

You will be redirected to your shopping cart in a few seconds.

Your packaging was added to your shopping cart.

You have chosen a quantity of <bold>{quantity} pieces</bold>. This allows you to add <bold>up to {maxdesigns} designs</bold> to your order.

Front and back side

You have chosen a quantity of <bold>{quantity} pieces</bold>. This allows you to add <bold>up to {maxdesigns} designs</bold> to your order.

You can decide in which design you want to have the sides and the bottom printed.

Please select the design for the sides and bottom first.

Set design:

You have chosen a <bold>Flat-bottom pouch</bold> and a quantity of <bold>over 2.500 pieces</bold>. You can print your bottom and sides individually.

You have chosen a <bold>Flat-bottom pouch</bold> and a quantity of <bold>under 2.500 pieces</bold>. You can print the bottom and sides in black or white.

Sides & Bottoms

Design

You can select the following Add-ons in step 5:

In the next steps you can choose the size, quantity and Add-ons for your packaging

Please select material first.

Colour deviations may occur with dark colours. <moreInfo>Learn more here</moreInfo>

Special features

Price details

Are you a customer with a big sales volume?

Quantity selection

After that you can choose Add-ons and designs for your packaging.

Please choose a quantity!

Get a discount when ordering larger quantities and select even more designs for your pouches.

Quantity

By exiting the configurator now, your previous configuration will be discarded.

Do you really want to exit the configuration process?

You have made a change. Due to dependencies, all subsequent configuration steps must be reset and reselected. <bold>Do you want to continue?</bold>

Order modification

Choose your services

In the next steps you can choose the quantity, Add-ons and designs for your packaging.

Please choose a size first!

Standard sizes

Wide sizes

The design upload takes place after your completed order.

When changing packaging form, material, size or quantity of your configuration, you will have to execute all subsequent steps all over again. This is due to all steps and selections being interdependent. 

Adapt configuration

Summary

Here you will find all the information you need to create a print file for your Packiro design. Images, fonts, colours, data export etc. ► Find out now!

Print templates to download

Select your individual print template